¶ APB Results
The default APB results table is shown below.
¶ Annulus
This column displays the annular labels of the uncemented annuli in the well.
¶ Inner String of Annulus
The column displays the name and description of the string inside the annulus shown in the 1st column.
¶ APB: ΔP
This column displays the APB of the corresponding annulus assuming that the neighboring annuli are not vented and resist any expansion of the walls of this annulus resulting from the APB in the annulus.
¶ Volumetric ΔT of Annular Fluid
This column displays the average temperature increase in the annular fluid resulting from the difference between the initial and final temperature profiles.
¶ Annular ΔV
This column displays the volume increase of the annular fluid.
¶ Annular ΔT / ΔV
This column displays the pressure/temperature ratio of the subject annulus. The ratio describes the pressure response of the annulus with respect to temperature.
The following columns are available for selection by right-clicking on the table and selecting the Column Settings option.
¶ Single Annulus APB: ΔP (if neighbors are vented)
This column displays the APB of the corresponding annulus assuming that the neighboring annuli are vented and therefore the walls of this annulus may expand as a result of the pressure buildup in the annulus.
¶ Isobaric ΔV
This column displays the volume increase of the annular fluid assuming that the pressure in the annulus is kept constant at the initial pressure in the annulus.
¶ Annular ΔV Error
This column displays the error in annular fluid volume increase.
¶ Table Manipulation
Right-Clicking anywhere in an APB table brings up a menu with a number options specific to these tables. They are:
- Properties
- Copy Selection as Text(CTRL+C)
- Copy Table (w/Headers)
- Copy Table as Image
- Save Table as Image
- Column Settings